Detecting Blank Sheet
Upon completion of the first page scanning, an alarm sounds if the page is nearly blank.
The blank sheet-detecting function works only when an original is scanned using the ADF.
The blank sheet-detecting function is ineffective for second and subsequent pages.
The machine cannot detect blank sheets if the user has put it into Preview mode using the [Preview] key.
This function notifies you if an original is placed wrong side down on the scanner. When this happens, a message appears for a few seconds. The message differs depending on number of pages to be scanned and transmission mode.
When sending a document using Immediate Transmission or when all pages have been scanned in Memory Transmission:
When some pages are left unscanned in Parallel Memory Transmission or Memory Transmission:
Even if a near blank sheet is detected, it is transmitted as normal.
You can turn this function on or off with the User Parameter (switch 11, bit 2). See “Parameter Settings”.
To cancel scanning if a blank sheet is detected, press the [Clear/Stop] key.
