Sending originals using the exposure glass (Memory Transmission)
This section explains how to send originals by Memory Transmission using the exposure glass.
Make sure [Immed. TX] is not highlighted.
Place the first page of the original face down on the exposure glass.
Specify a destination.
Make the scan settings you require.
Press the [Start] key.
The machine starts scanning.
Place the next original on the exposure glass within 60 seconds when you send multiple originals, and then repeat steps 4 and 5.
Repeat this step for each page.
Press the [
] key.
The machine dials the destination and starts transmission.
