Skip headerimage
ManualsContentsPreviousNextHelp

Specifying the ratio with [Plus] and [Minus]

Specify a ratio using [Plus] and [Minus].

  1. Press [Reduce / Enlarge].

    Operation panel screen illustration

  2. Press [Direct. Mag. %].

  3. Press [[Plus] [Minus] keys].

  4. Press [Horizontal].

  5. Adjust the ratio using [Plus] and [Minus].

    Operation panel screen illustration

    Pressing [Plus] or [Minus] changes the ratio in increments of 1%. Pressing and holding down [Plus] or [Minus] changes it in increments of 10%.

  6. Press [Vertical].

  7. Adjust the ratio with [Plus] and [Minus].

  8. Press [OK] twice.

Note