Skip headerimage
ManualsContentsPreviousNextHelp

Size Magnification

This function calculates a reproduction ratio based on the lengths of the original and copy.

Illustration of Size Magnification

Measure and specify the lengths of the original and copy by comparing "A" with "a".

  1. Press [Reduce / Enlarge].

    Operation panel screen illustration

  2. Press [Size Magnification].

  3. Enter the length of the original with the number keys, and then press [Sharp].

    Operation panel screen illustration

    You can enter sizes between 1 to 999 mm (0.1 to 99.9 inches) in increments of 1 mm (0.1 inches).

  4. Enter the length of the copy with the number keys, and then press [Sharp].

  5. Press [OK] twice.

Note