Skip headerimage
ManualsContentsPreviousNextHelp

Specifying the ratio with [Plus] and [Minus]

Specify a ratio using [Plus] and [Minus].

  1. Press [Reduce / Enlarge].

    Operation panel screen illustration

  2. Select a preset ratio which is close to the desired ratio.

  3. Adjust the ratio with [Plus] and [Minus].

    Operation panel screen illustration

    Press [Plus] or [Minus] changes the ratio in increments of 1%. Pressing and holding down [Plus] or [Minus] changes it in increments of 10%.

  4. Press [OK].

  5. Place the originals, and then press the [Start] key.

Note