Skip headerimage
ManualsContentsPreviousNextHelp

Interrupt Copy

Use this function if you want to interrupt a long copy job to make urgently needed copies.

Important

  1. Press the [Interrupt] key.

    Interrupt key illustration

    The interrupt key indicator lights. The machine stops scanning.

    Operation panel screen illustration

  2. Remove the originals that were being copied.

  3. Place the originals you want to copy.

  4. Press the [Start] key.

    The machine starts making copies.

  5. When copying is complete, remove the originals and copies.

  6. Press the [Interrupt] key again.

    The interrupt key indicator goes off.

  7. Replace the originals that you were copying, and then press the [Start] key.

    Following the instructions on the display.

Note