This function erases the center and/or all four sides of the original image.
This function has the following three types:
Erase Border
Erases the edge margin of the original image.
Erase Center
Erases the center margin of the original image.
Erase Center/Border
Erases both the center and edge margins of the original image.
The relationship between the original orientation and the erased part is as follows:
|
|
---|---|
Erased part
2 - 99 mm (0.1 - 3.9 inches)
To erase the image on the back side of the original, press [2 Sided Setting] and then [Back]. Erasing the image on the back side is valid when you copy 2-Sided originals.
The erase width is set to 10 mm (0.4 inches) as a default. You can change this setting under Edit in User Tools. For details about Edit, see “Edit”.
The width of the erased margin varies depending on the reproduction ratio.