Skip header
 

Selecting Copy Paper

Select paper you want to copy onto.

There are two ways to select copy paper:

Auto Paper Select

The machine selects a suitable size of copy paper automatically based on the detected original size and the reproduction ratio you select.

Manual Paper Select

Select the tray containing the paper you want to copy onto: a paper tray or the bypass tray.

See the following table for original sizes and orientations that can be used with Auto Paper Select (when copying at a ratio of 100%):

Metric version

Original location

Original size and orientation

Exposure glass

A3Landscape, B4 JISLandscape, A4PortraitLandscape, B5 JISPortraitLandscape, A5Portrait, 81/2 × 13Landscape

ADF

A3Landscape, B4 JISLandscape, A4PortraitLandscape, B5 JISPortraitLandscape, A5PortraitLandscape, 11 × 17Landscape, 81/2 × 11PortraitLandscape, 81/2 × 13Landscape, 8KLandscape, 16KPortraitLandscape

Inch version

Original location

Original size and orientation

Exposure glass

11 × 17Landscape, 81/2 × 14Landscape, 81/2 × 11PortraitLandscape

ADF

A3Landscape, A4PortraitLandscape, 11 × 17Landscape, 81/2 × 14Landscape, 81/2 × 11PortraitLandscape, 51/2 × 81/2PortraitLandscape, 10 × 14Landscape, 71/4 × 101/2Landscape

Note

  • Only the paper trays set to [No Display] or [Recycled Paper] in Paper Type and also set to [Yes] in Apply Auto Paper Select under Tray Paper Settings can be selected in Auto Paper Select mode. For details, see “System Settings”, Network and System Settings Guide.