Skip header
 

Custom sizes

When placing custom size originals in the ADF, specify the size of the originals.

Important

  • Paper that has a vertical length of 128 - 297 mm (5.1 -11.6 inches) and a horizontal length of 128 - 1260 mm (5.1 - 49.6 inches) can be placed with this function. However, the size of the copy paper is limited to 128 - 297 mm (5.1 -11.6 inches) vertically and 128 - 432 mm (5.1 -17 inches) horizontally.

1Press [Special Original].

Operation panel screen illustration

2Press [Original Size].

3Press [Custom Size].

4Enter the horizontal size with the number keys, and then press [Sharp].

Operation panel screen illustration

5Enter the vertical size with the number keys, and then press [Sharp].

6Press [OK] twice.

7Place the originals, and then press the [Start] key.

Note

  • To change the value you entered, press the item you want to change, and then enter a new value.