Skip header
 

Creating a New Scan Profile

Use the following procedure to create a new profile.

1On the [Start] menu, click [Control Panel].

Control Panel opens.

2Double-click [View scanners and cameras].

The [Scanners and Cameras] dialog box appears.

3Select this machine, and then click [Scan Profiles].

4Click [Add].

The [Add New Profile] dialog box appears.

5Configure the necessary settings for the profile.

6Click [Save Profile].

The scan settings are saved as a new profile.

Note

  • You can register multiple profiles. If multiple profiles are registered, the profile specified as default in the [Scan Profiles] dialog box is applied.

  • To specify a scan profile as the default profile, perform one of the following procedures:

    • In the [Scan Profiles] dialog box, click the scan profile, and then click [Set as default].

    • After you create a new scan profile, in the [Add New Profile] dialog box, select the [Set this profile as default] check box.