Covers
Using this function, you can insert cover and back sheets fed from a different tray to that of the body paper, and print on them.
To use this function, Collate must be set. Rotating Collate cannot be set.
The cover sheets should be the same size and orientation as the body paper.
Cover sheet
Prints the first page of the document on the sheet for the cover page.
Print on one side
Prints on one side of the cover sheet only, even when duplex printing is selected.
Print on both sides
Prints on both sides of the cover sheet when duplex printing is selected.
Cover sheet printed on both sides
Cover sheet printed on one side
Blank
When printing one side
When printing both sides
Front and Back Cover
Prints the first and last pages of the document as the cover pages.
Print on one side
Prints on one side of the cover sheet only, even when duplex printing is selected.
Print on both sides
Prints on both sides of the cover sheets when duplex printing is selected.
Back cover page face inside, and the number of pages is add
Blank
When printing on one side.
If "Auto Tray Select" is set as the paper feed tray for the body paper, the paper will be delivered from a tray containing paper in the
orientation. Therefore, if the cover paper is set to the 
orientation, the orientation of the output cover and body will be different.For printing methods, see the printer driver Help.
