Form Feed
This section gives instructions for operating the machine when there is no tray for the selected paper size or type, or when paper loaded in the machine has run out.
The tray cannot be changed if the following functions are set:
Staple
Punch
Duplex Print to a tray that does not support duplex printing
Cover Sheet
Slip Sheet
Chaptering
Chapter Slip Sheets
If form feed is selected for a tray with the following settings, you can change the tray by canceling the settings:
Staple
Punch
Duplex
If Auto Continue is selected, form fed paper is printed after a set interval. See "Printer Features".
