Skip header
 

Wireless LAN

This section lists the settings required for using the network TWAIN Scanner a wireless LAN connection.

For details about how to specify the settings, see "Interface Settings".

Menu

User Tool

Setting Requirements

Interface Settings/Network

Machine IPv4 Address

Necessary

Interface Settings/Network

IPv4 Gateway Address

As required

Interface Settings/Network

DNS Configuration

As required

Interface Settings/Network

DDNS Configuration

As required

Interface Settings/Network

IPsec

As required

Interface Settings/Network

Domain Name

As required

Interface Settings/Network

WINS Configuration

As required

Interface Settings/Network

Effective Protocol

Necessary

Interface Settings/Network

LAN Type

Necessary

Interface Settings/Network

Permit SNMPv3 Communication

As required

Interface Settings/Network

Permit SSL / TLS Communication

As required

Interface Settings/Network

Host Name

As required

Interface Settings/Wireless LAN

Communication Mode

Necessary

Interface Settings/Wireless LAN

SSID Setting

As required

Interface Settings/Wireless LAN

Ad-hoc Channel

As required

Interface Settings/Wireless LAN

Security Method

As required

Note

  • For the Effective Protocol setting, check that the protocol you want to use is set to [Active].

  • [Wireless LAN] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN are connected, the selected interface takes precedence.