For users of type 1 and 2
Configuration:
Desktop
Photosensitivity type:
OPC drum
Original scanning:
One-dimensional solid scanning system through CCD
Copy process:
Dry electrostatic transfer system
Development:
Dry two-component magnetic brush development system
Fusing:
Oilless belt fusing
Scan resolution:
600 dpi × 600 dpi
Copy/Print resolution:
600 dpi × 600 dpi
1200 dpi × 1200 dpi (for printer function only)
Exposure glass:
Stationary original exposure type
Original reference position:
Rear left corner
Warm-up time (23°C, rated voltage):
Type 1, 2: 27 seconds
Originals:
Sheet/book/objects
Maximum original size:
A3
, 11 × 17
Copy paper size:
Trays: A3
- A5
, 11 × 17 - 81/2 × 11, 8K (267 × 390 mm) , 16K (195 × 267 mm)Bypass: A3
- A6, 12 × 18 - 51/2 × 81/2, 8K (267 × 390 mm) , 16K (195 × 267 mm)Bypass (custom size): Vertical: 90.0 - 305.0 mm, 3.6 - 12.1 inches
Horizontal: 148.0 - 600.0 mm, 5.83 - 23.7 inches
Duplex: A3
- A5, 11 ×17 - 81/2 × 11, 8K (267 × 390 mm), 16K (195 × 267 mm)
Paper weight:
Trays: 60.0 - 256.0 g/m2, 16 lb. - 68 lb.
Bypass: 60.0 - 256.0 g/m2, 16 lb. - 68 lb.
Duplex: 60.0 - 169.0 g/m2, 16 lb. - 45 lb.
For details about and recommendations concerning thick paper, see “Thick Paper”.
Non-reproduction area (Copier):
Leading edge: 3.7 - 6.7 mm, 0.15 - 0.26 inches (2.7 - 5.7 mm, 0.10 - 0.22 inches for paper heavier than 81 g/m2, 22.0 lb.)
Trailing edge: 0.5 - 6.0 mm, 0.19 - 0.24 inches
Left and Right: 0.5 - 4.0 mm, 0.19 - 0.16 inches
First copy/print time:
Type 1, 2:
Colour: 8.0 seconds or less
B&W: 5.0 seconds or less
(A4, 81/2 × 11, 100% reproduction, feeding from Tray 1, on the exposure glass)
Copying speed (Full Colour / B&W):
Type 1:
28/28 copies/minute (A4
, 81/2×11)
Type 2:
33/33 copies/minute (A4
, 81/2×11)
Reproduction ratio:
Preset reproduction ratios:
Enlargement
Metric version
Inch version
400%
400%
200%
200%
141%
155%
122%
129%
115%
121%
Full size
Metric version
Inch version
100%
100%
Reduction
Metric version
Inch version
93%
93%
82%
85%
75%
78%
71%
73%
65%
65%
50%
50%
25%
25%
Zoom: From 25 to 400% in increments of 1%
Maximum continuous copy run:
999 sheets
Paper capacity (80 g/m2, 20 lb.):
Tray1, 2: 550 sheets
Bypass tray: 100 sheets
Power source:
220 - 240 V, 50/60 Hz, 8 A or more
Please be sure to connect the power cord to a power source as above. For details about power source, see “Power Connection”.
Power consumption:
Main unit only
Type 1
Type 2
Warm-up
1600 W
1600 W
Stand-by
216 W
216 W
During printing
761 W
787 W
Maximum
1600 W
1600 W
Complete system
Type 1
Type 2
Warm-up
1600 W
1600 W
Stand-by
226 W
226 W
During printing
855 W
881 W
Maximum
1600 W
1600 W
The complete system consists of the main unit, Booklet Finisher SR3000, bridge unit, lower paper trays, large capacity tray (LCT), and auto document feeder.
Dimensions (W × D × H up to exposure glass):
Type 1, 2: 670 × 671 × 760 mm, 26.4 × 26.5 × 30.0 inches
Space for main unit (W × D):
Type 1, 2: 1,065 × 671 mm, 42.0 × 26.5 inches
Noise emission:
Sound power level:
Main unit only
Type 1
Type 2
Stand-by
Less than 39.5 dB (A)
Less than 39.5 dB (A)
Copying
Less than 63.2 dB (A)
Less than 63.4 dB (A)
Complete system
Type 1
Type 2
Stand-by
Less than 39.7 dB (A)
Less than 39.7 dB (A)
Copying
Less than 69.5 dB (A)
Less than 70.3 dB (A)
Sound pressure level:
Main unit only
Type 1
Type 2
Stand-by
Less than 29.1 dB (A)
Less than 29.1 dB (A)
Copying
Less than 50.6 dB (A)
Less than 50.6 dB (A)
Complete system
Type 1
Type 2
Stand-by
Less than 26.5 dB (A)
Less than 26.5 dB (A)
Copying
Less than 55.2 dB (A)
Less than 56.0 dB (A)
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound power level and sound pressure level are measured from the position of the bystander.
The complete system consists of the main unit, auto document feeder, internal tray 2 (1 bin tray), lower paper trays, large capacity tray (LCT), bridge unit, Booklet Finisher SR3000, and punch kit for the Booklet Finisher SR3000.
Weight:
Type 1, 2: Approx. 110 kg, 242.6 lb.
