Skip header
 

Adding Staples

This section describes what to do when staples need replacing.

CAUTION


  • Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit. You can trap your fingers if you do not.

Important

  • Stapling failures or jams may occur if you use a staple cartridge other than that recommended.

Note

  • If you cannot pull out the upper unit, there are staples remaining inside the cartridge. Use all the staples, and do not add more.

  • Refill the stapler according to the finisher type. Check the type if you are unsure. For details about type of finisher, see “Appendix”.