This section describes how to replace toner.
|
|
|
|
|
|
|
Always add toner when the machine instructs you.
Fault may occur if you use toner other than the recommended type.
When adding toner, do not turn off the operation switch. If you do, settings will be lost.
Do not repeatedly install and remove toner cartridges. This will result in toner leakage.
Do not shake the removed toner cartridge. Remaining toner might scatter.
If the message “Check toner cartridge replacement(s).” appears, the toner has almost run out. Have a replacement toner cartridge at hand.
You can check name of the required toner name and the replacement procedure using the “Add Toner” screen.
Press [System Status] to check contact number where you can order supplies. See “Checking Machine Status and Settings”, Troubleshooting.
You can add all four colour toners in the same way.