Positions of WARNING and CAUTION labels for users of type 3 and 4
This machine has labels for 
WARNING and CAUTION at the positions shown below. For safety, please follow the instructions and handle the machine as indicated.
1
Do not touch! Surface may be very hot.
2
Do not touch the parts a label indicates. The inside of the machine could be very hot. Caution should be taken when removing misfed paper.
3
High temperature parts. Wait a while to allow the Fusing Unit to cool down before removing misfed paper.
4
Do not touch the parts a label indicates. The inside of the machine could be very hot. Caution should be taken when removing misfed paper.
5
Do not touch the parts a label indicates. The inside of the machine could be very hot. Caution should be taken when removing misfed paper.
6
The inside of the machine could be very hot. Do not touch the parts which a label is put on. Otherwise, an injury might occur.
7
Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit, or removing paper jam. You might trap your fingers if you do not. Take care not to touch the booklet finisher tray during operation. Otherwise, an injury might occur.
8
Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit, or removing paper jam. You might trap your fingers if you do not.
