![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
This section describes how to program Initial Set Up of a Special Sender.
Program the "Initial Set Up" of a Special Sender. You can also specify the Bypass Tray Paper Size.
Press [Facsimile Features].
Press [Reception Settings].
Press [Program Special Sender].
Press [Initial Set Up].
Select the function you want to program.
To program Authorized Reception and Special Reception Function, press [Authorized Reception] or [Special Reception Function].
Press [On] or [Off], and then press [OK].
The illustration shows the "Authorized Reception" display as an example.
To program Bypass Tray Paper Size, press [Bypass Tray Paper Size].
You can select a size from [Auto Detect], [Regular Size], or [Custom Size].
If you select [Auto Detect], proceed to steps 9 and 14.
If you select [Regular Size], proceed to steps 9, 10 and 14.
If you select [Custom Size], proceed to steps 9 and 11 to 14.
Select the size you want to program.
If you select [Regular Size], select a paper size displayed, and then proceed to step 14.
If you select [Custom Size], proceed to step 11.
Select the size you want to program from the sizes shown.
Make sure that [Vertical] is selected.
Enter the vertical size of the paper using the number keys, and then press the [] key.
Specify a vertical size from 90 mm (3.54") to 305 mm (12.0").
Each time you press [mm] or [inch], the units switch between "mm" and "inch".
If you enter a length and change the units by pressing [mm] or [inch], it is converted automatically (fractions are rounded off).
Enter the horizontal size of the paper using the number keys, and then press the [] key.
Specify a horizontal size from 148 mm (5.83") to 600 mm (23.62").
Each time you press [mm] or [inch], the units switch between "mm" and "inch".
If you enter a length and change the units by pressing [mm] or [inch], it is converted automatically (fractions are rounded off).
Press [OK].
Press [Exit].
Press the [User Tools/Counter] key.
If you select [Auto Detect], the machine recognizes the paper size automatically.