ManualsContentsPreviousNext |
This section describes the size and thickness limitations that apply to originals placed on the exposure glass or the ADF.
Type 1 and 2
Where original is set |
Acceptable original size |
Maximum number of sheets |
Paper thickness |
---|---|---|---|
Exposure glass |
Up to A3 (297 × 420 mm), 11 × 17 (279 × 432 mm) |
1 sheet |
|
ADF, one-sided original |
B5 to A3 (up to 1200 mm long) 51/2 × 81/2 to 11 × 17 |
50 sheets |
40-128 g/m2 (11-34 lb) |
ADF, two-sided original |
B6 to A3 (up to 432 mm long) 51/2 × 81/2 to 11 × 17 |
50 sheets |
52-105 g/m2 (17-28 lb) (64-105 g/m2 for 11 × 17) |
Type 3 and 4
Where original is set |
Acceptable original size |
Maximum number of sheets |
Paper thickness |
---|---|---|---|
Exposure glass |
Up to A3 (297 × 420 mm), 11 × 17 (279 × 432 mm) |
1 sheet |
|
ADF, one-sided original |
B6 to A3 (up to 1200 mm long) 51/2 × 81/2 to 11 × 17 |
100 sheets |
40-128 g/m2 (10-34 lb) |
ADF, two-sided original |
A5 to A3 (up to 432 mm long) 51/2 × 81/2 to 11 × 17 |
100 sheets |
52-128 g/m2 (14-34 lb) |
The weight range for originals in the Mixed Original Sizes mode is 52 - 81.4 g/m2 (13.8 - 21.6 lb).
With the Type 1 and 2, about 50 originals can be loaded in the ADF.
With the Type 3 and 4, about 100 originals can be loaded in the ADF.