Skip header
 

Sending to Folder Destinations (Folder destinations)

You can specify a folder destination by selecting a Destination key from the destination list.

Important

  • To send to a folder destination, you must first register the path for the folder in the Address Book. You cannot enter the path on the standby display. For details about how to register a folder destination, see “Registering Address and User for Facsimile/Scanner Functions”, Network and System Settings Guide.

1Press [Folder] to switch the transmission type to folder.

Operation panel screen illustration

2To set the file type, press [File Type].

Operation panel screen illustration

Select [TIFF] or [PDF], and then press [OK].

Operation panel screen illustration

3Press the Destination key to specify a destination.

Operation panel screen illustration

4Specify the next destination.

Operation panel screen illustration

To add another folder destination, press the next Destination key.

Press the transmission type tab to switch the transmission type between fax/IP-Fax, Internet Fax, e-mail, and folder.

5Press the [Start] key.

Note

  • Folder transmission is performed using Memory Transmission, which automatically starts transmission after storing documents in memory. If you switch the type of transmission to folder while the machine is in Immediate Transmission mode, the transmission mode is automatically switched to Memory Transmission.

  • For details about canceling a transmission, see “Canceling a Transmission”.

  • The Facsimile Features menu includes a user parameter setting (switch 17, bit 2) that enables you to configure the machine to force the user to press [Add] whenever s/he specifies a destination using a destination key. This prevents users accidentally sending documents to the wrong destination. See “Parameter Settings”.