Skip headerimage
ManualsContentsPreviousNextHelp

Specified Area Repeat

Repeatedly copies a specified portion of the image.

Important

To specify the area you want to repeat, you have to define the value of X1, Y1, X2, and Y2 on the original. Measure the area you want to specify before entering the area settings.

Illustration of Image Repeat

  1. Set the original on the exposure glass

X1: 0 - 412 mm (0 - 16.2 inches)

X2: 20 - 432 mm (0.8 - 17.0 inches)

Y1: 0 - 277 mm (0 - 10.8 inches),

Y2: 20 - 297 mm (0.8 - 11.6 inches).

  1. Select the size of copy paper and the reproduction ratio.

  2. Press [Edit / Colour].

    Operation panel screen illustration

  3. Press [Edit Image].

  4. Press [Image Repeat].

  5. Press [Specified Area].

  6. Enter the length of [X1] with number keys, and then press [Sharp].

    Operation panel screen illustration

  7. Enter the length of [Y1] with the number keys, and then press [Sharp].

  8. Enter the length of [X2] with the number keys, and then press [Sharp].

  9. Enter the length of [Y2] with the number keys, and then press [Sharp].

  10. Press [OK] twice.