Skip headerimage
ManualsContentsPreviousNextHelp

Directional Size Magnification (mm)

Specify the horizontal and vertical lengths of the original and copy image.

Copies can be reduced or enlarged at different reproduction ratios horizontally and vertically.

Illustration of Directional Size Magnification

  1. Horizontal original size: A mm (inch)

  2. Vertical original size: B mm (inch)

  3. Horizontal copy size: a mm (inch)

  4. Vertical copy size: b mm (inch)

Measure and specify the lengths of the original and copy by comparing "A" with "a" and "B" with "b".

  1. Press [Reduce / Enlarge].

    Operation panel screen illustration

  2. Press [Dir. Size Mag. mm].

  3. Enter the horizontal size of the original with the number keys, and then press [Sharp].

    Operation panel screen illustration

    You can enter sizes between 1 to 999 mm (0.1 to 99.9 inches) in increments of 1 mm (0.1 inch).

  4. Enter the horizontal size of the copy with the number keys, and then press [Sharp].

  5. Enter the vertical size of the original with the number keys, and then press [Sharp].

  6. Enter the vertical size of the copy with the number keys, and then press [Sharp].

  7. Press [OK] twice.

Note