Skip headerimage
ManualsContentsPreviousNextHelp

Basic Procedure

This section describes the basic procedure for making copies.

Important

  1. Make sure "Ready" appears on the screen.

    If any other function is displayed, press the [Copy] key on the left side of the control panel.

    Initial copy screen

    Operation panel screen illustration

  2. Make sure no previous settings remain.

    When there are previous settings remaining, press the [Clear Modes] key.

  3. Place the originals.

  4. Make desired settings.

  5. Enter the number of copies with the number keys.

    The maximum copy quantity that can be set is 999.

  6. Press the [Start] key.

    The machine starts copying.

    When placing originals on the exposure glass, press the [Sharp] key after all originals are scanned.

  7. When the copy job is finished, press the [Clear Modes] key to clear the settings.

Note

Reference

Related topics

Interrupt Copy
Auto Start
Job Preset