Batch Mode
When copying in Batch mode, Type 1 and 2 models copy originals of 50 or more pages as single documents, even if those originals are divided when fed into the ADF.
When copying in Batch mode, Type 3 and 4 models copy originals of 100 or more pages as single documents, even if those originals are divided when fed into the ADF.
Place special originals, such as translucent paper, one by one.
Press [Special Original].
Select [Batch] and then press [OK].
Place the first part of the original, and then press the [Start] key.
After the first part of the original has been fed, place the next part, then press the [Start] key.
When [SADF] is displayed instead of [Batch], specify the Batch mode under Switch to Batch in User Tools. For details about Switch to Batch, see “Input/Output”.
To copy subsequent originals in this mode, repeat step 4.
When the Sort, Combine or 1 Sided
2 Sided function has been set, press the [
] key after all originals have been scanned.You cannot switch between 1-sided and 2-sided originals during copying.
