Skip header
 

Top Page > Copy and Document Server Reference > Placing Originals > Placing Originals > Placing Originals on the Exposure Glass

Placing Originals on the Exposure Glass

Place originals on the exposure glass.

Important

  • Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.

1Lift the ADF.

Be sure to lift the ADF by more than 30 degrees. Otherwise, the size of the original might not be detected correctly.

2Place the original face down on the exposure glass. The original should be aligned to the rear left corner.

Start with the first page to be copied.

Exposure glass illustration

  1. Positioning mark

  2. Scales

3Lower the ADF.

Note

  • You can specify the way in which copies are delivered when copying an original placed on the exposure glass under Copy Eject Face Method in Glass Mode in User Tools. For details, see “Input/Output”.

Reference