Skip header
ManualsContentsPreviousNextHelp

Divide

This section explains settings for dividing multiple originals by a specified number of pages and then sending them.

  1. Press [Original Feed Type].

  2. Press [Divide].

    Operation panel screen illustration

  3. Press [Change], and then use the number keys to enter the number of pages you want to divide the job into sets of.

    Operation panel screen illustration

  4. Press the [Sharp] key.

  5. If necessary, press [Division Check].

    When you select [Division Check], if the originals were not scanned in order due to a paper jam or multi-sheet feed, a screen for stopping or continuing scanning appears at the end of the scan.

  6. Press [OK] twice.

    The current settings are displayed.

    Note

    • If the last page of a batch of divided two-sided originals is blank, you can skip that page. To skip scanning, in [Last Page] under [2 Sided Original], select [1 Side]. To scan the last page as a blank page, select [2 Sides]. For details, see "Two-sided original".