Enabling WSD using Web Image Monitor
To use this machine as a WSD scanner, you must first configure the following settings using Web Image Monitor on a client computer:
WSD scanner function (default setting: [Off])
Click [Configuration], click [Initial Settings] under [Scanner], and then set [WSD (Scanner)] to [On].
WSD protocol (default setting: [Active])
Click [Configuration], click [IPv4] or [IPv6] under [Network], and then enable [WSD (Scanner)].
Use the following procedure to set the WSD scanner function to [On].
On the [Start] menu, click [Network].
Double-click the icon for this machine.
Click [Login].
The Web Image Monitor login page appears.
Enter your login user name and password in the [Login User Name] and [Login Password] boxes respectively, and then click [Login].
Consult your administrator if you require a login user name and password.
On the menu in the left frame, click [Configuration].
Under [Scanner], click [Initial Settings].
The [Initial Settings] page appears.
Set [WSD (Scanner)] to [On].
Click [OK].
For details about displaying Web Image Monitor, see "Monitoring", Network and System Settings Guide. For details about using Web Image Monitor, see Web Image Monitor Help.
