Skip headerimage
ManualsContentsPreviousNextHelp

PS Menu

This section describes the user tools in the PS Menu under Printer Features.

This menu appears only when the optional PostScript 3 unit is installed.

Job Timeout

You can specify how long the printer waits (in seconds) before cancelling the current job when the job is interrupted while being processed.

The default setting is [Use Driver / Command].

If you select [Use Machine Settings], enter a value between 0 and 999.

The default setting is "0".

"0" does not mean timeout.

Wait Timeout

You can specify how long the printer waits (in seconds) before it cancels receiving the job when the printer cannot detect the end of the job.

The default setting is [Use Driver / Command].

If you select [Use Machine Settings], enter a value between 0 and 999.

The default setting is "300".

"0" does not mean timeout.

Data Format

You can select a data format.

The default setting is [TBCP].

This setting is not effective when operating the machine with a parallel or EtherTalk connection.

When operating the machine with a parallel connection, and also if the binary data is sent from the printer driver, the print job is canceled.

When operating the machine with an Ethernet connection, the print job is canceled under the following conditions:

  • The printer driver data format is TBCP, and the data format selected on the display panel is Binary Data.

  • The printer driver data format is binary, and the data format selected on the display panel is TBCP.

Resolution

You can set the print resolution in dots per inch.

The default setting is [600 dpi (Fast)].

Color Setting (Colour Setting)

You can make an RGB setting.

The default setting is [Super Fine].

Color Profile (Colour Profile)

You can set the colour profile.

The default setting is [Auto].

Process Color Model (Process Colour Model)

Specify the colour model.

The default setting is [Color (Colour)].

Reference