Skip headerimage
ManualsContentsPreviousNextHelp

Printing a Sample Print file

The following procedure describes how to print a Sample Print file with the PCL 5c/6 and the RPCS printer driver. For details about how to print a Sample Print file with the PostScript 3 printer driver, see PostScript 3 Supplement included as a PDF file on the CD-ROM.

Important

  1. Configure Sample Print in the printer driver's properties.

    For details about configuring the printer drivers, see the relevant Help files.

  2. Start printing from the application's [Print] dialog box.

    Make sure to set more than two copies.

    The Sample Print job is sent to the machine, and the first set is printed.

  3. On the machine's control panel, press the [Printer] key to display the Printer screen.

  4. Press [Print Jobs].

    Operation panel screen illustration

    A list of print files stored in the machine appears.

  5. Press [Sample Print Job List].

    Operation panel screen illustration

    A list of Sample Print files stored in the machine appears.

    Depending on the security settings, certain print jobs may not be displayed.

  6. Select the file you want to print, and press [Print].

    Operation panel screen illustration

  7. Enter the new number of sets using the number keys.

    Operation panel screen illustration

    You can enter up to 999 sets.

    Press the [Clear/Stop] key to correct any entry mistakes.

  8. Press [Yes].

    The remaining sets are printed.

    Press [No] to cancel printing.

Note