Skip headerimage
ManualsContentsPreviousNextHelp

Conditions for Bidirectional Communication

Bidirectional communication allows information about paper size and feed direction settings to be automatically sent to the printer. You can check printer status from your computer.

To support bidirectional communication, the following conditions must be met:

When connected with parallel cables

  • The computer must support bidirectional communication.

  • The machine must support bidirectional communication.

  • The interface cable must support bidirectional communication.

  • The machine must be connected to the computer using the standard parallel cables and parallel connectors.

  • Under Windows 2000, [Enable bidirectional support] must be selected, and [Enable printer pooling] must not be selected on the [Ports] tab with the RPCS printer driver.

When connected with the network

  • The machine must support bidirectional communication.

  • Under Windows 2000/XP/Vista, Windows Server 2003/2003 R2, [Enable bidirectional support] must be selected, and [Enable printer pooling] must not be selected on the [Ports] tab with the RPCS printer driver.

  • In addition to the above, one of the following conditions must also be met:

    • IPP port name must include the IP address when using the IPP protocol.

When connected with USB

  • The printer must be connected to the computer's USB port using the USB interface cable (for Windows 2000/XP/Vista, Windows Server 2003/2003 R2).

  • The computer must support bidirectional communication.

Note