Skip header
 

Covers

Using this function, you can insert cover and back sheets fed from a different tray to that of the body paper, and print on them.

Important

  • To use this function, Collate must be set. Rotating Collate cannot be set.

  • The cover sheets should be the same size and orientation as the body paper.

Cover sheet

Prints the first page of the document on the sheet for the cover page.

  • Print on one side

    Prints on one side of the cover sheet only, even when duplex printing is selected.

    Illustration of cover sheet

  • Print on both sides

    Prints on both sides of the cover sheet when duplex printing is selected.

    • Cover sheet printed on both sides

      Illustration of cover sheet

    • Cover sheet printed on one side

      Illustration of cover sheet

  • Blank

    • When printing one side

      Illustration of cover sheet

    • When printing both sides

      Illustration of cover sheet

Front and Back Cover

Prints the first and last pages of the document as the cover pages.

  • Print on one side

    Prints on one side of the cover sheet only, even when duplex printing is selected.

    Illustration of front and back cover

  • Print on both sides

    Prints on both sides of the cover sheets when duplex printing is selected.

    • Back cover page face inside, and the number of pages is add

      Illustration of front and back cover

  • Blank

    • When printing on one side.

      Illustration of front and back cover

Note

  • If "Auto Tray Select" is set as the paper feed tray for the body paper, the paper will be delivered from a tray containing paper in the Portrait orientation. Therefore, if the cover paper is set to the Landscape orientation, the orientation of the output cover and body will be different.

  • For printing methods, see the printer driver Help.