Skip headerimage
ManualsContentsPreviousNextHelp

Reproduction Ratio

This section describes the user tools in the Reproduction Ratio menu under Copier / Document Server Features.

Default settings are shown in bold type.

Shortcut Reduce/Enlarge

You can register up to three frequently used Reduce / Enlarge ratios other than the fixed Reduce / Enlarge ratio and have them shown on the initial display. You can also change registered Reduce / Enlarge ratios.

When you select [User Reduce/Enlarge Ratio], the ratio can be set from 25.0 to 400.0%, using the number keys.

The default setting for "F1" is 71% (Metric version) / 73% (Inch version).

The default setting for "F2" is 141% (Metric version) / 155% (Inch version).

The default setting for "F3" is 93%.

Reproduction Ratio

Specify the enlargement and reduction ratios that appear if [Reduce / Enlarge] is pressed on the copier screen.

Operation panel screen illustration

  • Metric version

    • 25%

    • A3 image A5, B4JIS image B6JIS (50%)

    • A3 image 8"multiplication13" (65%)

    • A3 image A4, A4 image A5 (71%)

    • B4JIS image 8"multiplication13" (75%)

    • B5JIS image A5, B4JIS image A4 (82%)

    • 93%

    • B4JIS image A3 (115%)

    • 8"multiplication13" image A3, A4 image B4JIS (122%)

    • A4 image A3, A5 image A4 (141%)

    • A5 image A3 (200%)

    • 400%

    • User R / E Ratio (25-400%)

  • Inch version

    • 25%

    • 11"multiplication17" image 51/2"multiplication81/2" (50%)

    • 11"multiplication17" image 81/2"multiplication11" (65%)

    • 11"multiplication15" image 81/2"multiplication11" (73%)

    • 81/2"multiplication14" image 81/2"multiplication11" (78%)

    • 81/2"multiplication13" image 81/2"multiplication11" (85%)

    • 93%

    • 81/2"multiplication14" image 11"multiplication17" (121%)

    • 81/2"multiplication11" image 11"multiplication17" (129%)

    • 51/2"multiplication81/2" image 81/2"multiplication14" (155%)

    • 51/2"multiplication81/2" image 11"multiplication17" (200%)

    • 400%

    • User R / E Ratio (25-400%)

Reduce/Enlarge Ratio Priority

You can set the ratio that has priority when [Reduce / Enlarge] is pressed.

The default setting is 71% (Metric version) / 73% (Inch version).

Ratio for Create Margin

You can set a Reduce / Enlarge ratio when registering Create Margin in a shortcut key.

Enter a ratio using number keys (in the range of 90 to 99%).

The default setting is 93%.

Reference