Skip header
ManualsContentsPreviousNextHelp

Top Page > Scanner Reference > Sending Scan Files to Folders > Switching to the Scan to Folder Screen

Switching to the Scan to Folder Screen

This section explains how to switch to the Scan to Folder screen.

If the E-mail screen is being displayed, press the [Folder] tab to switch to the Scan to Folder screen.

If the network delivery scanner screen is being displayed, switch to the Scan to Folder screen as follows:

  1. Press [Delivery Dest.].

    Operation panel screen illustration

    The E-mail screen or Scan to Folder screen appears.

  2. If the E-mail screen appears, press the [Folder] tab.

    Operation panel screen illustration

    The Scan to Folder screen appears.

    Note

    • You cannot switch from the network delivery scanner screen or other screens while destinations are being specified. To clear the specified destination, display the destination in the destination field, and then press the [Clear/Stop] key.

    • If you are scanning files using WSD, [Swtch Dest.List] or [WSD Dest.] appears instead of [Delivery Dest.]. To switch to the E-mail screen, press [Swtch Dest.List], and then, on the screen that appears, press [E-mail / Folder], or press [WSD Dest.].

TopPreviousNext
Copyright (C) 2008