Skip header
ManualsContentsPreviousNextHelp

Top Page > Scanner Reference > Sending Scan Files by E-mail > Switching to the E-mail Screen

Switching to the E-mail Screen

This section explains how to switch the screen to the E-mail screen.

If the Scan to Folder screen is being displayed, press [E-mail] to switch to the E-mail screen.

If the network delivery scanner screen is being displayed, switch to the E-mail screen as follows:

  1. Press [Delivery Dest.].

    Operation panel screen illustration

    The E-mail screen or Scan to Folder screen appears.

  2. If the Scan to Folder screen appears, press [E-mail].

    Operation panel screen illustration

    The E-mail screen appears.

    Note

    • You cannot switch from the network delivery scanner screen or other screens while destinations are being specified. To clear the specified destination, display the destination in the destination field, and then press the [Clear/Stop] key.

    • If you are scanning files using WSD, [Swtch Dest.List] or [WSD Dest.] appears instead of [Delivery Dest.]. To switch to the E-mail screen, press [Swtch Dest.List], and then, on the screen that appears, press [E-mail / Folder], or press [WSD Dest.].

TopPreviousNext
Copyright (C) 2008