Printing on Orientation-Fixed or Two-Sided Paper

This section explains how to print on paper whose orientation and printing side are unchangeable (letterhead paper, for example).

Use the settings and paper orientations shown below to ensure the machine prints onto orientation-fixed paper (such as letterhead or continuous stationery) correctly. Specify [Auto Detect] or [On (Always)] for [Letterhead Setting] in the printer settings, and then place the original and paper as shown below. For details about the letterhead print settings, see "System".

Paper Orientation	Paper Trays 1-4		Multi Bypass tray Large Capacity Tray
Paper Orientation	Letterhead Setting [On]	Letterhead Setting [Off]	Letterhead Setting [On]	Letterhead Setting [Off]
1-sided print
2-sided print
1-sided print
2-sided print

You cannot perform 2-sided (duplex) printing on paper fed from the multi bypass tray.
To print on letterhead paper when [Letterhead Setting] is set to [On (Always)], you must specify [Letterhead] as the paper type in the RPCS printer driver's settings.
If you change from 1-sided to 2-sided (duplex) printing during a copy job, all pages printed after the change will be 2-sided. If you want to print the remaining sets as 1-sided, specify a paper tray that is not available for duplex printing. For details, see the printer driver Help.

System