Programming Initial Set Up of a Special Sender

Press [Facsimile Features].

Press [Reception Settings].

Press [Program Special Sender].

Press [Initial Set Up].

Select the function you want to program.

To program Authorized Reception and Special Reception Function, press [Authorized Reception] or [Special Reception Function].

Press [On] or [Off], and then press [OK].

The illustration shows the "Authorized Reception" display as an example.

To program Bypass Tray Paper Size, press [Bypass Tray Paper Size].

You can select a size from [Auto Detect], [Regular Size], or [Custom Size].

If you select [Auto Detect], proceed to steps 9 and 14.

If you select [Regular Size], proceed to steps 9, 10 and 14.

If you select [Custom Size], proceed to steps 9 and 11 to 14.

Select the size you want to program.

If you select [Regular Size], select a paper size displayed, and then proceed to step 14.

If you select [Custom Size], proceed to step 11.

Select the size you want to program from the sizes shown.

Make sure that [Vertical] is selected.

Enter the vertical size of the paper using the number keys, and then press the [] key.

Specify a vertical size from 90 mm (3.6") to 305 mm (12.0").

Each time you press [mm] or [inch], the units switch between "mm" and "inch".

If you enter a length and change the units by pressing [mm] or [inch], it is converted automatically (fractions are rounded off).

Enter the horizontal size of the paper using the number keys, and then press the [] key.

Specify a horizontal size from 148 mm (5.9") to 600 mm (23.6").

Each time you press [mm] or [inch], the units switch between "mm" and "inch".

If you enter a length and change the units by pressing [mm] or [inch], it is converted automatically (fractions are rounded off).

Press [OK].

Press [Exit].

Press the [User Tools/Counter] key.