Preset Stamp

This section describes the user tools in the Preset Stamp menu under Stamp.

Stamp Language

You can select the language of the message printed in Stamp mode.

English, German, French, Italian, Spanish, Dutch, Portuguese, Polish, Czech, Swedish, Finnish, Hungarian, Norwegian, Danish, Russian, Japanese, Simplified Chinese, Traditional Chinese, Hangul, Catalan, Turkish

The default setting is English.

Stamp Priority

You can select the stamp type given priority when [Preset Stamp] is pressed.

The default setting is COPY.

Stamp Format

Specify how each stamp is printed.

Stamp Position
Specify where to print the stamp.
The default setting is Top Right.
Adjust Stamp Position
You can adjust the position of the stamp within the available ranges shown below.
- Metric version:
  "Top Left"T/B: 4-144mm, L/R: 4-144mm
  "Top Centre"T/B: 4-144mm, L/R: 72-72mm
  "Top Right"-T/B: 4-144mm, L/R: 4-144mm
  "Centre Left"-T/B: 72-72mm, L/R: 4-144mm
  "Centre"-T/B: 72-72mm, L/R: 72-72mm
  "Centre Right"-T/B: 72-72mm, L/R: 4-144mm
  "Bottom Left"-T/B: 4-144mm, L/R: 4-144mm
  "Bottom Centre"-T/B: 4-144mm, L/R: 72-72mm
  "Bottom Right"-T/B: 4-144mm, L/R: 4-144mm
- Inch version:
  "Top Left"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"
  "Top Centre"-T/B: 0.1"-5.7", L/R: 2.8"-2.8"
  "Top Right"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"
  "Centre Left"-T/B: 2.8"-2.8", L/R: 0.1"-5.7"
  "Centre"-T/B: 2.8"-2.8", L/R: 2.8"-2.8"
  "Centre Right"-T/B: 2.8"-2.8", L/R: 0.1"-5.7"
  "Bottom Left"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"
  "Bottom Centre"-T/B: 0.1"-5.7", L/R: 2.8"-2.8"
  "Bottom Right"-T/B: 0.1"-5.7", L/R: 0.1"-5.7"
Size
You can set the size of the stamp.
The default setting is 1 X.
Density
You can set the pattern used to print the stamp.
- Normal
  The stamp is printed on the image. You cannot check which parts will overlap.
- Lighter
  The image can be seen through the stamp.
- Lightest
  The image appears even clearer than in the Lighter setting.
The default setting is Normal.
Page to Stamp
You can have the stamp printed on the first page or all pages.
The default setting is All Pages.

Stamp Colour

Sets the stamp print colour.

The default setting is Black.