Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > Copy and Document Server Reference > Placing Originals > Placing Originals > Placing Originals on the Exposure Glass

Placing Originals on the Exposure Glass

Place originals on the exposure glass.

Important

  1. Lift the ADF.

    Be sure to lift the ADF by more than 30 degrees. Otherwise, the size of the original might not be detected correctly.

  2. Place the original face down on the exposure glass. The original should be aligned to the rear left corner.

    Start with the first page to be copied.

    Exposure glass illustration

    1. Positioning mark

    2. Scales

  3. Lower the ADF.

TopPreviousNext
Copyright (C) 2008