ManualsContentsPreviousNext |
This section explains how you can check the printer's status and the items displayed. Depending on the options installed on the printer, some items might not be displayed.
UNIX: Use the "lpq" command and "rsh", "rcp", "ftp", and "sftp" parameters.
mshell: Use the "status" command.
Messages |
Description |
---|---|
Adjusting... |
The printer is initializing or calibrating. |
Canceling Job... |
The job is being reset. |
Cover Open: Front/Left |
The front cover or left cover is open. |
Cover Open: Top |
The top cover is open. |
Current Job Suspended |
Printing is suspended. |
Empty: Black Toner |
The black toner cartridge is almost empty. |
Empty: Cyan Toner |
The cyan toner cartridge is almost empty. |
Empty: Magenta Toner |
The magenta toner cartridge is almost empty. |
Empty: Yellow Toner |
The yellow toner cartridge is almost empty. |
Energy Saver Mode |
The printer is in Energy Saver Mode. |
Error: Ethernet Board |
An Ethernet board error has occurred. |
Error: HDD Board |
A hard disk drive board error has occurred. |
Error: Optional Font |
An error has occurred in the font file of the printer. |
Error: Optional RAM |
An error has occurred in the optional memory unit. |
Error: Parallel I/F Board |
An error has occurred in the parallel interface. |
Error: PDL |
An error has occurred in the page description language. |
Error: Rem. Certificate Renewal |
An error has occurred in the remote sever renewal. |
Error: USB Interface |
An error has occurred in the USB interface. |
Error: Wireless Board |
An error has occurred in the wireless interface board. |
Error: Wireless Card |
Wireless card is not inserted during start up, or the wireless interface unit or the wireless card is taken out after start up. |
Full: Log Data Capacity |
The log data capacity is full. |
Full: Standard Tray |
Standard output tray is full. |
Full: Waste Toner |
Waste toner is full. |
Hex Dump Mode |
It is a hex dump mode. |
Independent-supplier Toner |
Toner that is not recommended is set. |
Jobs Suspended |
All jobs are suspended. |
Loading Toner... |
Toner is being supplied. |
Log Data Transfer failed |
Log transfer has failed. |
Low: Black Toner |
The black toner cartridge is not set correctly, or toner is almost running out. |
Low: Cyan Toner |
The cyan toner cartridge is not set correctly, or toner is almost running out. |
Low: Magenta Toner |
The magenta toner cartridge is not set correctly, or toner is almost running out. |
Low: Yellow Toner |
The yellow toner cartridge is not set correctly, or toner is almost running out. |
Mismatch: Paper Size |
Indicated paper tray does not contain paper of selected size. |
Mismatch: Paper Size and Type |
Indicated paper tray does not contain paper of selected size and type. |
Mismatch: Paper Type |
Indicated paper tray does not contain paper of selected type. |
Near Replacing: Black PCU |
Prepare the new black photoconductor unit. |
Near Replacing: Color PCU |
Prepare the new color photoconductor unit. |
Near Replacing: Maintenance Kit |
Prepare new Maintenance Kit. |
Near Replacing: Transfer Unit |
Prepare the new transfer unit. |
Nearly Full: Log Data Capacity |
The log is nearing data capacity. |
Nearly Full: Waste Toner |
Waste toner bottle is nearly full. |
No Paper: Selected Tray |
There is no paper in specified tray. |
No Paper: Tray 1 |
There is no paper in tray 1. |
No Paper: Tray 2 |
There is no paper in tray 2. |
No Paper: Tray 3 |
There is no paper in tray 3. |
No Paper: Tray 4 |
There is no paper in tray 4. |
Not Detected: Black Toner |
Black toner is not correctly set. |
Not Detected: Cyan Toner |
Cyan toner is not correctly set. |
Not Detected: Duplex Feed Unit |
The duplex unit is not correctly set. |
Not Detected: Fusing Unit |
The fusing unit is not correctly set. |
Not Detected: Input Tray |
The paper feed tray is not correctly set. |
Not Detected: Magenta Toner |
Magenta toner is not correctly set. |
Not Detected: PCU (C) |
The photoconductor unit (cyan) is not correctly set. |
Not Detected: PCU (K) |
The photoconductor unit (black) is not correctly set. |
Not Detected: PCU (M) |
The photoconductor unit (magenta) is not correctly set. |
Not Detected: PCU (Y) |
The photoconductor unit (yellow) is not correctly set. |
Not Detected: Transfer Unit |
The transfer unit is not correctly set. |
Not Detected: Tray 1 |
Tray 1 is not correctly set. |
Not Detected: Tray 2 |
Tray 2 is not correctly set. |
Not Detected: Tray 3 |
Tray 3 is not correctly set. |
Not Detected: Tray 4 |
Tray 4 is not correctly set. |
Not Detected: WasteToner Bottle |
Waste toner bottle is not correctly set. |
Not Detected: Yellow Toner |
Yellow toner is not correctly set. |
Offline |
Printer is offline. |
Paper Misfeed: Duplex Unit |
The paper has jammed in the duplex unit. |
Paper Misfeed: Internal/Output |
The paper has jammed in the internal or output tray. |
Printing... |
Printing is in progress. |
Processing |
Data is being processed. |
Proxy Address / Port Incorrect |
The proxy address and port setting is incorrect. |
Proxy User / Password Incorrect |
The proxy user name and password setting is incorrect. |
Ready |
The printer is ready to print. |
Replace Maintenance Kit |
It is time to replace Maintenance Kit. |
Replace Black PCU |
It is time to replace the black photoconductor unit. |
Replace Int. Transfer Unit |
It is time to replace the transfer unit. |
Replace PCU (Color) |
It is time to replace the photoconductor unit (color). |
Replace Transfer Unit |
It is time to replace the transfer cleaning unit. |
SD Card Authentication failed |
SD card authentication failed. |
Supplies Order Call failed |
The supply order call has failed. |
Tray Error: Duplex Printing |
Selected paper tray cannot be used for duplex printing. |
Warming Up... |
The printer is warming up. |
For details about UNIX commands, see UNIX Supplement.
Check the error contents that may be printed in the configuration page. For details about printing a configuration page, see "List/Test Print Menu"