Using SmartDeviceMonitor for Admin

Using SmartDeviceMonitor for Admin, you can monitor the network printers. Also, you can change the configuration of the network interface board using TCP/IP or IPX/SPX.

IPv6 cannot be used on this function.

Protocol stack provided with Operating System

Windows 2000
TCP/IP
IPX/SPX
NetWare
Novell Client for Windows NT/2000/XP
Windows Server 2003
TCP/IP
IPX/SPX
Windows XP
TCP/IP
IPX/SPX
Novell Client for Windows NT/2000/XP
Windows Vista
TCP/IP
Novell Client for Windows NT/2000/XP/Vista

Available operations

The following functions are available:

Printer Information function
- Display the network settings and detailed information of the printer.
- Display the number of pages printed under each user code.
- Display the status of print jobs sent from computers.
- Change the printer network settings.
Device Settings function
- Lock some of the setting items on the control panel so that they cannot be changed using the control panel.
- Select type of paper loaded in the paper trays.
Energy Saver function
- Enable or disable the Energy Saver mode.
System Status function
Display the information such as when paper is depleted during printing on a computer.
Groups function
- Monitor multiple printers at the same time. When there are multiple printers to manage, you can create groups and classify the printers to facilitate management.
- You can customize printer status according to groups, and send status notification e-mail to a computer.