Skip header
ManualsContentsPreviousNextHelp

Top Page > Software Guide > Making Printer Settings Using the Control Panel > Maintenance Menu > Maintenance Menu Parameters > General Settings

General Settings

Plain Paper Setting

You can select the type of plain paper.

  • Tray 1 to 4, Bypass Tray

    • Plain Paper 1

    • Plain Paper 2

    Note

    • Default: Plain Paper 1

Letterhead Setting

You can select the letterhead printing mode.

  • Letterhead 1

  • Letterhead 2

  • Letterhead 3

Note

  • Default: Letterhead 1

Glossy Paper Setting

You can select the glossy paper printing mode.

  • Glossy Paper 1

  • Glossy Paper 2

  • Glossy Paper 3

  • Glossy Paper 4

Note

  • Default: Glossy Paper 3

Coated Paper Setting

You can select the coated paper printing mode.

  • Coated Paper 1

  • Coated Paper 2

  • Coated Paper 3

  • Coated Paper 4,

Note

  • Default: Coated Paper 2

Label Paper Setting

You can select the label paper printing mode.

  • Label Paper 1

  • Label Paper 2

  • Label Paper 3

Note

  • Default: Label Paper 2

Envelope Setting

You can select the envelope printing mode.

  • Envelope 1

  • Envelope 2

  • Envelope 3

  • Envelope 4

Note

  • Default: Envelope 1

Replacement Alert

Use this function to specify the timing to notify user when supplies need to be replaced. Settings can be made separately for photo conductor unit, intermediate transfer unit, or fusing unit.

  • Photoconductor Unit

    Notify Sooner, Normal, Notify Later

    Note

    • Default: Normal

  • Intermediate Transfer Unit

    Notify Sooner, Normal, Notify Later

    Note

    • Default: Normal

  • Maintenance Kit

    Notify Sooner, Normal, Notify Later

    Note

    • Default: Normal

Supply End Option

Use this function to specify the whether or not to continue printing when the following supplies end: photo conductor unit, intermediate transfer unit, fusing unit.

  • Continue Printing

  • Stop Printing

Note

  • Default: Continue Printing

Display Supply Info

You can select whether or not to select the amount of toner on the initial screen.

  • On

  • Off

Note

  • Default: On

Menu Protect

You can select whether or not to protect menu. When you enable this setting, specify protection level.

  • Level 1

  • Level 2

  • Off

Note

  • Default: Level 2

  • If you would like to lower the protection level, disable this setting or select Level 1.

  • You may not be able to change this setting depending on the setting of the printer.

List/Test Print Lock

You can select whether or not to prohibit List/Test printing.

  • On

  • Off

Note

  • Default: Off

  • You may not be able to change this setting depending on the setting of the printer.

Unit of Measure

You can select whether to use "mm" or "inch" when specifying the size of custom sized paper.

  • mm

  • inch

Note

  • 220-240V Default: mm

  • 120V Default: inch

Panel Key Sound

You can select whether or not to sound the beeper when the control panel is pressed.

  • On

  • Off

Note

  • Default: On

Warm-up Beeper

You can select whether or not to sound the beeper when the printer has completed a warm-up process.

  • On

  • Off

Note

  • Default: On

Display Contrast

You can specify the density of the display.

Key Repeat

You can specify whether or not to scroll the display panel when the [Up arrow key] or [Down arrow key] key is held down. When you enable this setting, specify the scroll speed. (If repeat time is set to "Long", scroll speed becomes slow.)

  • Do not Repeat

  • Normal

  • Repeat Time: Medium

  • Repeat Time: Long

Note

  • Default: Normal

TopPreviousNext
Copyright (C) 2007