Installing the PostScript 3 printer driver (TCP/IP)

Quit all applications currently running.

Insert the CD-ROM into the CD-ROM drive.

The installer starts.

Select an interface language, and then click [OK].

The default interface language is English.

The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi, Russian.

Click [PostScript 3 Printer Driver].

Add Printer Wizard starts.

Step 5 does not apply for Windows Vista users.

Click [Next >].

Click [Local printer] or [Local printer attached to this computer.], and then click [Next >].

If you are using Windows Vista, you do not need to click [Next>].

Click [Create a new port:].

Click [DeskTopBinder - SmartDeviceMonitor], and then click [Next >].

Click [TCP/IP], and then click [Search].

A list of printers using TCP/IP appears.

Select the printer you want to use, and then click [OK].

Only printers that respond to a broadcast from the computer appear. To use a printer not listed here, click [Specify Address], and then enter the IP address or host name of the printer.

Check that the name of the printer whose driver you want to install is selected, and then click [Next >].

Change the printer name if you want, and then click [Next >].

Select the [Yes] check box to configure the printer as default.

Step 13 does not apply for Windows Vista users.

Specify whether or not to share the printer, and then click [Next >].

Specify whether or not to print a test page.

If you are using other than Windows Vista, click [Next].

Click [Finish].

The printer driver installation starts.