Installing the PostScript 3 printer driver
Quit all applications currently running.
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Select an interface language, and then click [OK].
The default interface language is English.
The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi, Russian.
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
Step 5 does not apply for Windows Vista users.
Click [Next >].
Click [Local printer] or [Local printer attached to this printer], and then click [Next >].
If you are using Windows Vista, you do not need to click [Next].
Click [Create a new port:].
Click [Standard TCP/IP Port], and then click [Next >].
If you are using other than Windows 2000, [Standard TCP/IP Port] in [Create a new port].
Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
Enter the printer name or IP address in the [Printer Name or IP Address] box.
The [Port Name] text box automatically obtains a port name. Change this name if necessary.
When screen for Device selection appears, select "RICOH NetworkPrinter Driver C Model".
Click [Next >].
Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
Check that the name of the printer whose driver you want to install is selected, and then click [Next >].
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
Step 15 does not apply for other than Windows 2000 users.
Click [Next>].
Specify whether or not to share the printer, and then click [Next >].
Specify whether or not to print a test page.
If you are using other than Windows Vista, click [Next].
Click [Finish].
The printer driver installation starts.
Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on the CD-ROM root directory.
A user code can be set after the printer driver installation. For information about user code, see the printer driver Help.
A message appears if there is a newer version of the printer driver already installed. If there is, you cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [Add Printer]. See "Messages Displayed When Installing the Printer Driver".
