Moving and Transporting the Printer
Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes frayed or otherwise damaged.
When moving the machine, each person should hold the handles that are located on opposite sides, and then lift it slowly. Lifting it carelessly or dropping it may cause an injury.
Before moving the machine, unplug the power cord from the wall outlet. If the cord is unplugged abruptly, it could become damaged. Damaged plugs or cords can cause an electrical or fire hazard.
When moving the printer after use, do not take out any of the toners, photo conductor units, nor waste toner bottle to prevent toner spill inside the machine.
Be sure to disconnect all cables from the printer before transporting it.
The printer is a piece of precision machinery. Take care to avoid damage during transportation.
If optional paper feed units are attached, remove them from the printer and move them separately.
Repack the printer using its original packaging for transporting.
The printer weighs approximately 50 kg (110 lb.).
