Skip header
 

Top Page > Hardware Guide > Removing Misfed Paper > Removing Misfed Paper

Removing Misfed Paper

An error message appears if a paper misfeed occurs. The error message gives the location of the misfeed. Check the location and remove the paper.

CAUTION

  • The inside of this printer becomes very hot. Do not touch parts labeled "iconst1.082.gif" (indicating a hot surface). Touching these parts will result in burns.

Important

  • Do not forcefully remove misfed paper, it may tear and torn pieces may remain inside the printer.

  • When paper is misfed a number of times, the following are possible causes.

    • The control panel settings do not match the size or orientation of the loaded paper.

    • The friction pad is dirty.

  • For details about clean the friction pad, see "Cleaning the Friction Pads".

  • Misfed paper may be covered with toner. Be careful not to get toner on your hands or clothes.

  • If paper is still misfed after you have checked the above-mentioned causes, contact your sales or service representative.

Reference