This section describes the types of paper and the settings they require.
The following table shows you the control panel settings that correspond to the printer driver's paper type settings.
Printer driver setup |
Paper thickness |
Printer setup |
Supported paper feeding tray |
Duplex printing |
---|---|---|---|---|
[Plain (60 - 105 g/m2)] |
60.2 to 90.2 g/m2 (16 to 24lb.) |
[Plain Paper 1] |
Any input tray can be used. |
Supported |
[Plain (60 - 105 g/m2)] |
90.2 to 104.7g/m2 (24 to 28lb.) |
[Plain Paper 2] |
Any input tray can be used. |
Supported |
[Thick 1 (105 - 157 g/m2)] |
104.7 to 157 g/m2 (28 to 42 lb.) |
[Thick Paper 1] |
Any input tray can be used. |
Supported |
[Thick 2 (157 - 216 g/m2)] |
157 to 216 g/m2 (42 to 58 lb.) |
[Thick Paper 2] |
Any input tray can be used. |
Not supported |
[Thin (52 - 60 g/m2)] |
52 to 60.2 g/m2 (14 to 16 lb.) |
[Thin Paper] |
Any input tray can be used. |
Not supported |
[OHP Transparency] |
[OHP (Transparency)] |
Any input tray can be used. |
Not supported |
|
[Letterhead] |
[Letterhead 1] *1 [Letterhead 2] *1 [Letterhead 3] *1 |
Any input tray can be used. |
Supported |
|
[Labels] |
[Label Paper 1] *1 [Label Paper 2] *1 [Label Paper 3] *1 |
Any input tray can be used. |
Not supported |
|
[Glossy] |
[Glossy Paper 1] *1 [Glossy Paper 2] *1 [Glossy Paper 3] *1 [Glossy Paper 4] *1 |
Any input tray can be used. |
Supported |
|
[Coated Paper] |
[Coated Paper 1] *1 [Coated Paper 2] *1 [Coated Paper 3] *1 [Coated Paper 4] *1 |
Any input tray can be used. |
Not supported |
|
[Special 1] |
[Special Paper 1] |
Any input tray can be used. |
Supported |
|
[Special 2] |
[Special Paper 2] |
Any input tray can be used. |
Supported |
|
[Special 3] |
[Special Paper 3] |
Any input tray can be used. |
Supported |
|
[Color] |
[Colour Paper] |
Any input tray can be used. |
Supported |
|
[Bond] |
[Bond Paper] |
Any input tray can be used. |
Supported |
|
[Preprinted] |
[Preprinted Paper] |
Any input tray can be used. |
Supported |
|
[Recycled] |
[Recycled Paper] |
Any input tray can be used. |
Supported |
|
[Cardstock] |
[Cardstock] |
Any input tray can be used. |
Supported |
|
[Envelope] |
[Envelope 1] *1 [Envelope 2] *1 [Envelope 3] *1 [Envelope 4] *1 |
Any input tray can be used. |
Not supported |
*1 If the printing result is badly wet or smudged, change the setting on the printer's control panel.