Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > Software Guide > Other Print Operations > Stored Print > Printing a Stored Print File > Printing a selected Stored Print file only

Printing a selected Stored Print file only

  1. Press the [Menu] key.

    The [Menu] screen appears.

  2. Press the [Down arrow key] or [Up arrow key] key to display [Stored Print], and then press the [Sharp Enter] key.

  3. Press the [Down arrow key] or [Up arrow key] key to display [Print One File], and then press the [Sharp Enter] key.

    The file name and the time when the job was stored appear.

    To cancel printing, press the [Escape] key.

  4. Press the [Down arrow key] or [Up arrow key] key to display the file you want to print, and then press the [Sharp Enter] key.

    If you set a password in the printer driver, a password confirmation screen appears. Enter the password.

  5. Enter the number of sets you want to print using the [Up arrow key] or [Down arrow key] keys.

    You can enter up to 999 sets.

    If the number of sets to be printed is not specified, one less set than the smallest number specified on the machine is printed for every selected document. If the smallest number of sets specified on the machine is "1", one set each is printed for every document.

    To cancel printing, press the [Escape] key.

  6. Press the [Sharp Enter] key.

    The "To print, press [ESC] 1-4 times" message appears. Then the file selection screen reappears.

  7. Press the [Online] key.

    The initial screen appears.

TopPreviousNext
Copyright (C) 2008