Skip headerimage
ManualsContentsPreviousNextHelp

Top Page > Software Guide > Preparing for Printing > Using the LPR Port > Installing the PostScript 3 Printer Driver (Windows XP/Vista, Windows Server 2003/2003 R2)

Installing the PostScript 3 Printer Driver (Windows XP/Vista, Windows Server 2003/2003 R2)

Important

  1. Quit all applications currently running.

  2. Insert the CD-ROM into the CD-ROM drive.

    The installer starts.

  3. Select an interface language, and then click [OK].

    The default interface language is English.

  4. Click [PostScript 3 Printer Driver].

    Add Printer Wizard starts.

    Step 5 does not apply for Windows Vista users.

  5. Click [Next >].

  6. Click [Local Printer attached to this computer], and then click [Next >].

    If the [Automatically detect and install Plug and Play Printer] check box is selected, clear it.

    If you are using Windows Vista, you do not need to click [Next >].

  7. Click [Create a new port:].

  8. Click [LPR Port] in [Create a new Port], and then click [Next >].

  9. Enter the printer's IP address in the [Name or address of server providing lpd] box.

  10. Enter "lp" in the [Name of printer or print queue on that server] box, and then click [OK].

  11. Check that the name of the printer whose driver you want to install is selected, and then click [Next >].

  12. Change the printer name if you want, and then click [Next >].

    Select the [Yes] check box to configure the printer as default.

    Step 13 does not apply for Windows Vista users.

  13. Click [Next >].

  14. Specify whether or not to print a test page, and then click [Next >].

    If you are using Windows Vista, you do not need to click [Next >].

  15. Click [Finish].

    The printer driver installation starts.

Note

TopPreviousNext
Copyright (C) 2008