Using Hold Print
You need Mac OS X v10.2 or higher to use this function.
To use this function, the optional hard disk must be installed on the printer.
The number of pages the printer can save varies depending on the contents of the print images. At most, the printer can save 100 jobs or 1,000 pages for Sample Print, Locked Print and Hold Print.
Hold Print files will not appear on the display panel if they have already been printed or deleted using Web Image Monitor before you select [Hold Print] using the control panel.
Hold Print files printed or deleted using Web Image Monitor after you have selected [Hold Print] using the control panel will still appear on the display panel. However, an error message will appear if you try to print or delete those Hold Print files.
If the application has a collate option, make sure that it is not selected before sending a print job. By default, Hold print jobs are automatically collated by the printer driver. If the collate option is selected in the application print dialog box, more prints than intended may be printed.
Print jobs are not saved on the hard disk in the following cases. You can check the error log for jobs not saved.
When there are 100 Sample Print, Locked Print, Hold Print and Stored Print jobs saved on the hard disk.
When the total number of pages saved on the hard disk exceeds 1,000 pages.
In the application, click [Print] on the [File] menu.
The [Print] dialog box appears.
In the pop-up menu, click [Job Log].
On the [Job Type:] pop-up menu, click [Hold Print].
In the [User ID:] box, enter a user ID using up to eight alphanumeric (a-z, A-Z, 0-9) characters. File Name can also be set.
The user ID associates the user with his/her jobs.
After making the necessary settings, click [Print].
The document file is saved in the printer.
To print the document, perform the following steps.
To delete the document, see "Deleting a Hold Print File".
Press the [Menu] key.
The [Menu] screen appears.
Press the [
] or [
] to display key [Hold Print], and then press the [
Enter] key.
Press the [] or [] to display key [Print One File], and then press the [ Enter] key.
The file name and the time when the job was stored appear.
Select the file you want to print using the [] or [] key, and then press the [ Enter] key.
To cancel printing, press the [Escape] key.
Press the [ Enter] key.
The “To print, press [ESC] 1-4 times” message appears. Then the file selection screen reappears.
Press the [Online] key.
The initial screen appears.
When printing is completed, the stored file is deleted.
To stop printing after printing has started, press the [Job Reset] key. The file is deleted.
For details about setting printer drivers, see the printer driver Help. You can also print or delete a Hold Print file from Web Image Monitor. For details, see Web Image Monitor Help.
Deleting a selected Hold Print file only
Press the [Menu] key.
The [Menu] screen appears.
Press the [] or [] key to display [Hold Print], and then press the [ Enter] key.
Press the [] or [] key to display [Delete One File], and then press the [ Enter] key.
The file name and the time when the job was stored appear.
Press the [] or [] key to display the file you want to delete, and then press the [ Enter] key.
To cancel deleting a Hold Print file, press the [Escape] key.
Check that the file you want to delete is displayed, and then press the [ Enter] key.
Press the [Online] key.
The initial screen appears.
Deleting all Hold Print files
Press the [Menu] key.
The [Menu] screen appears.
Press the [] or [] key to display [Hold Print], and then press the [ Enter] key.
Press the [] or [] key to display [Del. All Files], and then press the [ Enter] key.
The user ID and the time when the job was stored appear.
Press the [] or [] key to confirm deleting all files, and then press the [ Enter] key.
To cancel deleting a Hold Print file, press the [Escape] key.
Press the [ Enter] key.
Press the [Online] key.
The initial screen appears.
