bonjour(rendezvous)

Bonjour settings are displayed.

msh> bonjour

You can specify the bonjour service name.

msh> bonjour cname "computer name"

• The computer name can be entered using up to 63 alphanumeric characters.

You can enter information about the location where the printer is installed.

msh> bonjour location "location"

• Information about location can be entered using up to 32 alphanumeric characters.

• diprint

  msh> bonjour diprint {0-99}

• lpr

  msh> bonjour lpr {0-99}

• ipp

  msh> bonjour ipp {0-99}

You can specify the order of priority for "diprint", "lpr", and "ipp". Smaller numbers indicate higher priority.

msh> bonjour ipttl {1-255}

You can specify the IP TTL (the number of routers a packet can pass through).

You can reset the computer name and location information.

msh> bonjour clear {cname | location}

• cname

  Reset the computer name. The default computer name will be displayed when the computer is restarted.

• location

  Reset the location information. The previous location information will be deleted.

msh> bonjour linklocal "interface_name"

• If many types of interface are installed, configure the interface that communicates with linklocal address.

• If the connected computer's IP address is a link local address specified by the DHCP's Autonet, and multiple interfaces are connected to the printer, you can select an interface to communicate through.

• If you do not specify an interface, the Ethernet interface is automatically selected.

• wlan can be specified only when the wireless LAN interface unit is installed.

  Interface	Interface configured
  ether	Ethernet interface
  wlan	Wireless LAN interface

msh> bonjour ippport {ipp | ssl}

• Appears when SSL is enabled.

• If the "ipp" is selected, the port number is set to "631". If the "ssl" is selected, the port number is set to "443".